1. Long press the  button to turn the mower ON/OFF.  also triggers quick start mowing.

2. Use the   and  arrow buttons to navigate in the menu or enter digits like PIN code, date and time.

3. Press the OK button to quick access the settings menu or to confirm the chosen settings in the menu.

4. Use the  button to return the mower back to charging station. It can be triggered only when you are in the "Welcome to use” page (top line).

5.1 Find a good spot for charging station.

Find a flat and open spot on the lawn border with strong Wi-Fi signal coverage. You can use your mobile phone to check the strength of your home Wi-Fi signal.

5.2 "Power On" the charging station

1. Place the charging station on the target spot.

2. Connect extension cable to power supply DC outlet connector.

3. Connect extension cable to charging station power connector.

4. Plug power supply into a mains AC power socket.

⚠Warning:

l When connecting the power supply to mains power socket, use a residual-current device (RCD) with a tripping current of maximum 30 mA.

5.3 Charging station/RTK Base Station Module readings and trouble shooting

1. Wait for approx. 2 minutes till RTK base station receives a stable GPS signal.

2. Check the LED status indicator of Real Time Kinematic (RTK) base station module.

Note:

Ÿ Don not put (metal) object like mobile phone or metal garage roof upon the RTK base station as they could block the GPS signal. You can follow the next step to install RTK base station separately if you want to install a metal garage roof on the charging station.

Ÿ For best positioning accuracy and mowing performance, it is strongly recommended to keep the RTK base station module at a distance that equals or exceeds the height of nearby buildings or tall trees. Trees or buildings close to the charging station, can weaken, or block the GPS signal going into the RTK base station.

3. GPS signal is weak when the RTK base station module status LED is flashing blue or is solid red. You can relocate the entire charging station or use the extension cable to only move the RTK base station module separately to another open or higher spot. Make sure the RTK base station module (or entire charging station) is not installed under large objects like roof extension or tree, that could block or weaken the GPS signal. You can find the recommended location (triangle mark) for RTK base station.

1. Remove obstacles within 2m radius in front of the charging station so that RoboUP® mower can come out of the charging station smoothly.

2. To secure the charging station to the ground use the supplied long anchor screws and Allen key.

A. Remove the fixing screw of the RTK base station module and detach the RTK base station module from charging station.